For more program-specific information, please select the appropriate program below.
You should configure the terminal emulator on your Host for 9600 baud, 8 bits data, no parity, 1 stop bit, and whatever communication port you chose on the back of your Host, turn on the power to your SerialICE Controller/Target, and you should see a banner that looks something like this:
IMON version 5.1.0 [EB], LSI LOGIC Corp. Wed Mar 19 13:01:41 1997 This is free software, and comes with ABSOLUTELY NO WARRANTY. You are welcome to redistribute it without restriction. NVRAM: Am29F010. Debugger support: CROSSVIEW, DBX. Type 'h' for on-line help. IMON>If you don't see this display, you might need to use a special cable to satify the requirements of your host's hardware flow control scheme (even if it has been disabled).